Triple Crown - Specifications

Commercial Roofs | Metal Roofs | Blisters | Brochure | Details | Flashing
Specifications | Before & After | Thermal Shock

The Ultimate Recover Roofing System!

Specifications TC-103

1. If applicable, remove all loose gravel, dirt and debris from entire roof area.
2. All HVAC, chill units, evaporative coolers to be lifted and roofed under.
3. Apply flood coat to entire roofed area of high grade modified (emulsion) clay-based ambient temperature asphalt. Application rate no less than 10 gallons per 100 square feet.
4. Apply an additional layer of ambient temperature asphalt to entire roofed areas including all related parapet and firewall flashings. Roll out and broom in for conformity and proper adhesion, high performance woven polyester membrane rolls.
5. Apply top coating of modified (emulsion), clay-based, ambient temperature asphalt to entire roof and flashed areas, imbedding chopped fiberglass. The fiberglass application rate of no less than 3 pounds per 100 square feet. Final application to provide seamless monolithic surface.
6. Apply additional layer of clay-based asphalt with aluminum pigments impregnated for reflectivity and ultra-violet ray's retardation purposes.

Features:

• Save the added cost and high exposure of total roof removal.
• With an existing gravel-surfaced roof, we actually reduce the weight on your decks after the installation of our roof.
• Our woven polyester membrane is many times stronger than conventional roofing felts, has 500% more elongation capability (stretch), weighs much less than inferior paper or fiberglass felt.
• The Triple Crown roof system uses high grade modified (emulsion) asphalt that is clay-based. Our emulsion asphalt is more pliable, impervious to rot, and longer lasting than conventional roofing asphalt. The addition of Bentonite Clay© makes our asphalt (and your roof) much more fire retardant.
• The chopped fiberglass process makes your roof monolithic - no seams to split, crack or peel apart - and adds a great deal of strength not found in conventional roofing.
• Aluminized final coating lowers deck temperatures 15-20 degrees.